+38 044 379-12-05, (-07)

+38 044 379-12-05, (-07)

+38 044 379-12-05, (-07)

ВЕНТИЛЯЦИОННАЯ УСТАНОВКА ROTOBLOCK

DESCRIPTION

Features:

  • Supporting structure made of anti-corodal aluminum profile;
  • Continuous base under the entire machine made of anti-corodal aluminum;
  • Double-skinned steel sandwich panels with a galvanized steel inner sheet and a galvanized steel outer sheet coated with a scratch- and corrosion-resistant material;
  • 46 mm thick insulated with polyurethane foam or mineral wool with directional cells;
  • Aluminum-finned dampers with an aerodynamic profile with opposite ribs;
  • Air supply and intake filters, class F6, with rigid pockets (EN 779:2011);
  • The rotary heat exchanger is installed vertically to achieve maximum efficiency;
  • Available in aluminum (for temperature-only exchange) or sorption (with a hygroscopic treatment and high-efficiency wheel, ensuring heat exchange in both temperature and humidity);
  • The motor driving the heat recovery wheel, with a belt drive and pulley, is equipped with a variable speed controller;
  • Large inspection doors, the same design as the panel, are equipped with safety locks and locking handles.
  • Indoor and outdoor versions;
  • Monoblock or modular versions.

COMPONENTS:

  • Additional cold water heater;
  • Additional hot water heater;
  • Steam humidifier or humidifier with steam-generating pack;
  • Mufflers;
  • G4 pre-filters

Control and management functions:

  • Heat recovery control in maximum economy mode with variable speed control, automatic free cooling control based on temperature or enthalpy, and integrated anti-freeze control;
  • Supply temperature compensation based on outside air temperature;
  • Fan operation with constant supply flow depending on filter contamination;

Variable-flow fan operation with:
- 0-10V signal control (CO2 sensor or potentiometer) for single-zone use;
- constant-pressure control for multi-zone use;

  • Control of heating media based on time programming using 2-way or 3-way valves, depending on the system;
  • Weekly time interval control;
  • BMS interface with Modbus or LON protocol;
  • Monitoring via a Web-Ethernet port using TCP/IP technology;
  • GSM modem kit for remote monitoring via SMS with alarm devices.


Detailed information can be found on the manufacturer’s website at www.rhoss.com or contact our specialists.