Specifications:
- Air conditioning and thermal ventilation fan coil unit: for vertical installation with ducting or direct room air intake;
- Construction: monoblock, consisting of an air handling section and a motor fan assembly with a supporting frame made of extruded aluminum profiles, a double chamber with concealed screws, and corner joints made of black glass-reinforced nylon;
- Removable panels made of double-walled steel, galvanized and pre-painted on the inside and with a protective film on the outside, lined with polyurethane foam (45 kg/m³ density) and a total thickness of 25 mm;
- Base made of extruded aluminum profiles;
- The treatment section consists of the following components: pleated filters with multi-section regeneration and G3 efficiency rating, removable from the end (or from the side using the KEF accessory), a heat exchanger with a 2-4-6 row coil in a water-cooled version with right and left mountings and a galvanized steel condensate collection tray with natural drainage;
- Upon request, hydraulic mountings can be located on the left or right side of the unit;
- Complete fan motor: with top or front feed, consisting of dual-intake centrifugal fans with forward-curved blades and an anti-vibration insert on the transition diffuser, a three-phase electric motor (IP55), a V-belt transmission with variable pulley (up to model 080), and rubber shock absorbers.
Available versions:
- Single-phase motor for models 030-050 with adjustable pulley;
- Three-phase 4-pole motor with adjustable pulley;
- Three-phase 4/6-pole motor with adjustable pulley;
- Three-phase 4/8-pole motor with adjustable pulley;
- BA2R-PRE - Additional 2-row battery for 4-pipe systems for UTNV 4R;
- BA2R-POST - Additional 2-row post-heating battery for UTNV 4R and UTNV 6R;
- EFL - Filter outlet on the side opposite the hydraulic connections.
Detailed information can be found on the manufacturer’s website at www.rhoss.com or contact our specialists.
