ТЕПЛОВЕНТИЛЯТОР WWH LT

WWH LT

WWH-LT is a new series of indirectly fired air heaters that have been specifically designed for use in combination with low water temperature heating systems such as a heat pump or district heating network.

Energy efficiency and better heat distribution

The WWH-LT range consists of four models that provide power from 8 to 38 kW at a typical water temperature of 45°C inlet and 35°C outlet. The new models feature an electronically controlled fan motor, meaning energy consumption is 25% lower than a standard WWH air heater. However, the air output is approximately 10% higher, meaning that in practice the heat is better distributed throughout the room.

Cool in summer

As an option, the WWH can be connected to a cooling pump. In light of the recent warm summer, this desire is becoming widespread in many commercial buildings. With a cooling water temperature of 7°C, this provides a cooling capacity of 7 kW to 32 kW, depending on the type. However, even when combined with a heat pump, the WWH-LT can still provide some cooling when the outside temperature rises to (much) above 25°C, simply by passing water through the unit. Ideal for small production spaces, showrooms, stores, etc., the unit comes standard with a condensate collection tray.

Purge options:

• Horizontal or vertical - note: if there is additional cooling, not vertical due to condensate drainage;
• with additional slats;
• 4-sided plenum, e.g. for in-ceiling installation;
• 6-sided plenum, e.g. for in-ceiling installation.

Available power:

8 kW - 19 kW - 29 kW - 38 kW (at an inlet/outlet temperature of 45°/35°C)

The WWH-LT can be controlled by a simple 230 V stepless voltage controller, a room thermostat, or a clock thermostat. A 0-10 V speed controller is also available for adjusting the air volume as needed.

For more information, please visit the manufacturer's website at www.winterwarm.com or contact our specialists.