HC: Wall-mounted axial fans with IP55 engine
Wall-mounted axial fans with a glass-fibre-reinforced plastic impeller.
Fan:
- Sheet steel casing.
- Impeller made of glass-fibre-reinforced polyamide 6.
- Protective grille to prevent accidental contact complies with standard UNE 100250.
- For models 71, 80, 90 and 100, the protective grille is supplied as an accessory.
- Airflow direction: motor to impeller.
Engine:
- Motors with IE-2 energy efficiency class, except for power ratings below 0.75 kW for single-phase and 2-speed models.
- Class F motors, with ball bearings, IP55 protection, except for single-phase models of sizes 45–63 with IP54 protection. 1- or 2-speed depending on the model.
- Single-phase 230V – 50Hz, three-phase 230/400V – 50Hz (up to 5.5 hp) and 400/690V – 50Hz (over 5.5 hp).
- Operating temperature: –25°C to +60°C.
Coating:
- Anti-corrosion coating based on polyester resin (polymerises at 190°C following degreasing with an alkaline solution and pre-treatment with a phosphate-free solution).
Detailed information can be found on the manufacturer's website at the link www.sodeca.com or contact our specialists.
