Wall-mounted exhaust fans with a dynamic pressure system and an electrically operated hatch opening system, connected to an exhaust duct. The special design allows for quick and effective removal of harmful gases and smoke in the event of a fire. Suitable for installation in industrial buildings, warehouses, and any other type of building. Complies with EN-12101-3 and has F-400 and F-300 certificates. Can be used for outdoor ventilation.
Fan:
- Extremely durable construction capable of withstanding severe weather conditions.
- The structure is made of corrosion-resistant galvanized sheet steel.
- The waterproof design prevents water from entering the system.
- 60 mm thick thermal insulation prevents warm air loss in winter.
- Wall mounting bracket ensures correct installation with minimal effort.
- Certified to F-400 (number 0370-CPR-2823) and F-300 (number 0370-CPR-3249)
- Limit switch.
- Rotors with variable angle of attack. Made of cast aluminum.
- Air movement in the direction from the motor to the impeller.
Engine:
- Class H motors for continuous operation S1 and emergency use S2. With ball bearings. IP55 protection and 1 or 2 speeds depending on the model.
- Motors with IE3 energy efficiency class for power ratings of at least 0.75 kW, except for single-phase motors. 2-speed and 8-pole.
- Three-phase electric motors 230/400 V, 50 Hz (up to 3 kW) and 400/690 V, 50 Hz (over 3 kW).
- Maximum exhaust air temperature: S1: for continuous operation from −20 to 40° C. Also suitable for warm climates with temperatures up to 50° C. S2: 300° C/2 h. 400° C/2 h.
Coating:
- Galvanized sheet steel with anti-corrosion properties.
Detailed information can be found on the manufacturer's website at the link www.sodeca.com or contact our specialists.
