Wall-mounted exhaust fans with a dynamic pressure system and an electrically operated hatch opening system, connected to an exhaust duct. The special design allows for quick and effective removal of harmful gases and smoke in the event of a fire. Suitable for installation in industrial buildings, warehouses, and any other type of building. Complies with EN-12101-3 and has F-400 and F-300 certificates. Can be used for outdoor ventilation.
Fan:
- Extremely durable construction capable of withstanding severe weather conditions.
- The construction is made of corrosion-resistant galvanized sheet steel.
- The waterproof construction prevents water from entering the system.
- 60 mm thick thermal insulation prevents the loss of warm air in winter.
- Wall mounting bracket and spiral support stand ensure correct installation with minimal effort.
- Certified to F-400 (number 0370-CPR-2823) and F-300 (number 0370-CPR-3249).
- Limit switch.
- Tubular sheet steel housing with polyester resin-based anti-corrosion coating.
- Variable angle of attack rotors made of cast aluminum.
- Air flow direction from motor to impeller.
Engine:
- Class H motors for continuous operation S1 and emergency use S2. With ball bearings, IP55 protection, and 1 or 2 speeds depending on the model.
- Motors with IE3 energy efficiency class for power ratings of at least 0.75 kW, except for single-phase, 2-speed, and 8-pole motors.
- Three-phase electric motors 230/400 V, 50 Hz (up to 3 kW) and 400/690 V 50 Hz (power over 3 kW).
- Maximum exhaust air temperature: S1: for continuous operation from −20 to 40° C, also suitable for warm climates with temperatures up to 50° C. S2: 300° C/2 h. 400° C/2 h.
Coating:
- Galvanized sheet steel with anti-corrosion properties.
Detailed information can be found on the manufacturer's website at the link www.sodeca.com or contact our specialists.
